PEP2000 v0150/v11.53 [アマチュア無線（FT2K）]
Ver. 0150 MAIN CPU implements improvements (also includes all previous updates):
• The FH-2 [<-][->] keys are made to increment the frequency at 100kHz up or down.
• CW carrier is corrected to change LSB ⇔ USB when the indication is changed on VFO B.
• Correct the CW Auto Mode.
• DMU Band scope Display Signal Peak Frequency is centered.
Ver. 11.53 EDSP implements improvements (also includes all previous updates):
• The DNR algorithm is not reset between TX/RX, to eliminate the increased receive noise after a
transmission.
• Increase the response of the compression level meter in conjunction with the PROC knob. (Max
up to 12dB).
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=66EA91711DFB68C03DED4AD35153E12C&DivisionID=65&isArchived=0
• The FH-2 [<-][->] keys are made to increment the frequency at 100kHz up or down.
• CW carrier is corrected to change LSB ⇔ USB when the indication is changed on VFO B.
• Correct the CW Auto Mode.
• DMU Band scope Display Signal Peak Frequency is centered.
Ver. 11.53 EDSP implements improvements (also includes all previous updates):
• The DNR algorithm is not reset between TX/RX, to eliminate the increased receive noise after a
transmission.
• Increase the response of the compression level meter in conjunction with the PROC knob. (Max
up to 12dB).
http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=66EA91711DFB68C03DED4AD35153E12C&DivisionID=65&isArchived=0
特に変わり映えなし。
EDSPは前回からV-Up無し。
別件で見かけたのだが、AGC SLOPEをNOR→SLOPEに切り替えると聴感上のノイズレベルが下がって聴きやすくなった。今回のV-Upとは関係ないみたいだけど。
by sawada (2009-12-07 15:27)