PEP2000 2009/5/13 [アマチュア無線(FT2K)]
Ver. 0148 MAIN CPU implements improvements (also includes all previous updates):
• Corrects the INDICATOR (NOTCH, CONT and uTUNE).
Ver. 11.53 EDSP implements improvements (also includes all previous updates):
• The DNR algorithm is not reset between TX/RX, to eliminate the increased receive noise after a
transmission.
• Increase the response of the compression level meter in conjunction with the PROC knob. (Max up to
12dB).
NOTES:
*Rotate the [METER] switch to select “COM” (Compression). We recommend setting the PROC level within the 5dB
to 10dB range.
*When menu settings are saved on the DMU-2000 CF card and transferred to the new version, some previous versions
may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card.
*After installation of Ver. 0142 ~ 0148 you may find that computer operation with PCC-2000 may not be possible for
setting proper MENU items. We will release the updated PCC-2000 software when it becomes available.
• Corrects the INDICATOR (NOTCH, CONT and uTUNE).
Ver. 11.53 EDSP implements improvements (also includes all previous updates):
• The DNR algorithm is not reset between TX/RX, to eliminate the increased receive noise after a
transmission.
• Increase the response of the compression level meter in conjunction with the PROC knob. (Max up to
12dB).
NOTES:
*Rotate the [METER] switch to select “COM” (Compression). We recommend setting the PROC level within the 5dB
to 10dB range.
*When menu settings are saved on the DMU-2000 CF card and transferred to the new version, some previous versions
may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card.
*After installation of Ver. 0142 ~ 0148 you may find that computer operation with PCC-2000 may not be possible for
setting proper MENU items. We will release the updated PCC-2000 software when it becomes available.
ウチ、4月に今更DX9000のユーザー登録したんだけど、全く連絡ありません。
PEP9000への無料書き換え(送料は有料、って所が恐ろしい)、早くやって欲しいんですがねー。
by hoz (2009-05-20 21:42)
噂によると順番に案内しているようで。
改修はハード改修(ボード交換?)もあるみたいで、1日に何台も出来ないようです。
ブツがブツだけに、1台1台エンジニアが調整とチェックしていそうですね。
WDXCに聞いてみたら?
で、送料。確かにド級ですからね。
目黒に持ち込んだ方が安かったりして?
by sawada (2009-05-20 22:52)
重すぎて一人じゃ持てないですねん・・・。
by hoz (2009-05-20 23:42)
はじめまして
たまにおじゃましております。 FT-2000Dユーザーです。
最新のPEP2000を入れましたが、CWモニターの音量が以前より
上がらなくなった(同じポジションでも小さく聞こえる)ようになりました。
フォーンのほうは問題ないようですが・・・
個体差で当方だけでしょうか
by 8エリア (2009-06-14 11:56)
サイドトーン? 受信音?
受信音でしたら、DNRをON/OFFしてみてください。BUGバージョンだとCWが小さく聞こえなくなります。
最新は5/13版です。
by sawada (2009-06-14 12:17)
言葉足らずですみません。
CWサイドトーンの音量です。 ボリューム位置が以前と同位置でも
どうもAF OUTが小さいような・・・気のせいかもしれませんね
5/13版を入れた後の現象でした。
by 8エリア (2009-06-15 15:18)